Extron Electronics MGP 462xi Series - Manual (Page 99)

5-3 MGP Series • HTML Configuration and Control
PRELIMINAR
Y
a . Enter the administrator or user password in the Password field.
N A User Name entry is not required.
b . If desired, select the Remember my password check box to have the
system input your password the next time you enter the IP address.
c . Click OK.
5 . If you entered the filename for a custom HTML page in step 4, the browser
displays that page. If not, the browser displays the System Status page, which
is the MGP’s default start page. You can select the tabs at the top of this
screen to display additional screens that enable you to configure and operate
the MGP.
Viewing System Status
The System Status Web page on the Status tab provides information on your
MGP ’s current settings. Changes must be made via the Configuration Web pages,
the MGP Series Windows-based configuration software, SIS commands, or the MGP
front panel. Personnel who have user access can view this page but cannot access
the Configuration pages; they see only the Status, Control, and Background tabs.
The following figure shows a typical MGP System Status Web page.
System Status page