Extron Electronics MGP 462xi Series - Manual (Page 68)

SIS
™ Pr
ogramming and Contr
ol, cont’d
MGP Series • Softwar
e Configuration and Contr
ol
4-16
PRELIMINARY
Command/response table for SIS commands (continued)
Command
ASCII (Telnet)
(host to processor)
Response
(processor to host)
Additional description
Image size and position
Set image size and position E X50@ , X52! * X52! * X52# * X52# I Y }
Ixy X50@ , X52! * X52! * X52# * X52# ]
Set position and size of the image in window X50@ .
X50@ = 0 through 4; 0 = all windows.
For X52! :
0 = 2048; limits are ± the output resolution.
For
X52# :
Minimum = 1/16 the size of the active input area.
Maximum = double the active output area for 200%
zoom.
N The variables must be entered in the following order: Horizontal position, vertical position, horizontal size, vertical size.
View image size and position E X50@ I Y } X50@ , X52! * X52! * X52# * X52# ]
View position and size of the image in window
X50@ .
Zoom mode (window)
Zoom in 1 * X50@ + { X50@ Wzm ] Increase the size of window X50@ while keeping the
aspect ratio constant.
Zoom out 1 * X50@ – { X50@ Wzm ] Decrease the size of window X50@ while keeping
the aspect ratio constant.
Zoom mode (image)
Zoom in 2 * X50@ + { X50@ Izm ] Increase the size of the image in window X50@
while keeping the aspect ratio constant.
Zoom out 2 * X50@ – { X50@ Izm ] Decrease the size of the image in window X50@
while keeping the aspect ratio constant.
Window presets
Recall window preset without input 1 * X51# . Rpr 1 * X51# ] Recall window preset X51# without input settings.
X51# = 1 through 128.
Recall window preset with input 2 * X51# . Rpr 2 * X51# ] Recall window preset X51# with input settings.
Save window preset 2 * X51# , Spr 2 * X51# ] Save window settings to a preset at location X51# .
Preset preview E X51# * X50@ XY } Wxy X51# * X50@ * X52& * X52! * X52! * X52@ * X52@ ]
View the size, priority, and position of window
X50@ saved as preset X51# .
X52& = 1 through 4; 1 = top priority