ZOLL R Series Monitor Defibrillator Rev J - Manual (Page 275)

Monitoring Electrodes Attachment
9650-0904-01 Rev. K ZOLL R Series Operator’s Guide 10–3
Note: Lead sets and lead cables are different accessories and are not interchangeable. For
5-lead monitoring, use a 5-lead cable.
Note: 3-lead cables are available with and without ESU noise suppression.
Monitoring Electrodes Attachment
Attach snap-on leads to electrodes and check for good contact between the electrode and the
lead termination.
If you are using a 3-lead set, connect the end of the 3-lead set to a OneStep Pacing cable.
Note: The 3-lead set is a standard option with R Series Plus models.
Peel the protective backing from the ECG electrode. Be careful to keep adhesive surface free of
electrolyte gel.
Caution Only use electrodes that are well within the expiration date indicated on the package.
3-lead configuration 5-lead wire configuration
RA LA
LL
RA LA
LL
V
RL
3-lead set 5-lead cable 3-lead cable
OneStep Pacing cable 3-lead set
connection complete