ZOLL R Series Monitor Defibrillator Rev J - Manual (Page 453)

Monitoring Electrodes Attachment
9650-0912-01 Rev. K ZOLL R Series Operator’s Guide 9–3
Note: Lead sets and lead cables are different accessories and are not interchangeable. For
5-lead monitoring, use a 5-lead cable.
Note: 3-lead cables are available with and without ESU noise suppression.
Monitoring Electrodes Attachment
Attach snap-on leads to electrodes and check for good contact between the electrode and the
lead termination.
If you are using a 3-lead set, connect the end of the 3-lead set to a OneStep Pacing cable.
Peel the protective backing from the ECG electrode. Be careful to keep adhesive surface free of
electrolyte gel.
Caution Only use electrodes that are well within the expiration date indicated on the package.
Apply the ECG electrodes firmly to the patient’s skin, pressing around the entire perimeter of
the electrodes.
3-lead configuration 5-lead wire configuration
RA LA
LL
RA LA
LL
V
RL
3-lead set 5-lead cable 3-lead cable
OneStep Pacing cable 3-lead set
connection complete