Yokogawa YFGW410 - Manual (Page 84)

<D3. Constructing a Field Wireless System>
D3-23
IM 01W02D01-01EN
 When the [Add] button is clicked, the window shown in Figure D3-22 appears.
FD0322.ai
Figure D3-22 Backbone Router Settings Window
Item Description Default setting
Network ID Automatically displays the ID of the field wireless subnet. Automatic setting
Device Tag
Enter the Device Tag configured by the field wireless access point
setup tool. To change from an automatically allocated device tag,
enter the information manually.
Allocated in ascend-
ing order from
BBR001
Model
Select the model type of the Field Wireless Access Point. Cur-
rently, the only setting is YFGW510.
YFGW510
Duocast ID
When the Field Wireless Access Point is set for redundancy, and
the field wireless device is connected by Duocast, select the same
ID as the pairing Field Wireless Access Point. The following selec-
tions can be made: blank, A to H When the Duocast function is not
used, leave this setting blank. When the Duocast ID has already
been configured to a Field Wireless Access Point, the setting is
displayed in the following format: Duocast ID:device tag. (Ex.
A:BBR001). When the Duocast ID has already been configured
to 2 Field Wireless Access Point, the setting is displayed in the fol-
lowing format: [Duocast ID]: Reserved. (Ex. A:Reserved)
Blank
IP Address
Enter the IP address of the Field Wireless Access Point.
When automatic allocation of the IP address was selected using
the setting at the [Field Wireless Backbone] window after selecting
[YFGW410 Settings] and [Interfaces], the displayed IP address
cannot be changed.
Automatically
allocated in as-
cending order from
192.168.200.111
Use Factory Default
Password
Configure whether to use the factory default password. It must
be the same as that set by the field wireless access point setup
tool. When this check box is selected, the default setting is used.
The factory default for the Field Wireless Access Point setting is to
have the check box selected.
Check box selected
Password
When the factory default password is not used, enter the pass-
word manually. It must be the same as that set by the field wireless
access point setup tool. The following characters can be used:
half-byte numbers and half-byte alphabetic characters from A to F
(uppercase an lowercase characters are distinguished).
Blank
Duocast is a method for a field wireless device to transmit the same data to a paired Field Wire-
less Access Point to make the transmission path of a field wireless network including a Field
Wireless Access Point redundant. When setting the path of the field wireless device, always set
the Field Wireless Access Point with the same Duocast ID as the 2 paths.