Edwards Signaling eFSA250 - Manual (Page 199)

Chapter 4: Reports
E-FSA64 and E-FSA250 Technical Reference Manual 187
Corr Group Config
Suite Sig Sil
Activation Count
Zone report
The panel provides a Zone report that lists all of the devices that are in a
selected zone. The report lists the devices by the device label.
To view a zone report:
1. Press the Menu button and choose Reports.
2. Choose Zone.
3. Choose the zone for which you want a report.
Main Menu
Reports
Test
Control

Reports
Correlation Groups
Corr Group Config
Zone

Zones
Zone 01
Zone 02
Zone 03
System Configuration report
The panel provides a System Configuration report that displays the current
configuration of the system. There are seven system configuration reports
displaying the information shown below. System configuration reports can be
printed or viewed on the LCD.
All report: Displays all panel, device, loop, zone, event, and dialer configuration
information.
Panel operation report: Displays firmware version, marketplace, language, AC
fail delay, reset inhibit, zone re-sound, auto signal silence, in suite silence time,
port CU, key #1, key #2, aux power reset, lock remote read, AC voltage, date
format, daylight savings, minutes offset, day start, night start, LCD banner, IP (IP