KROHNE OPTIFLEX 1300C EN - Manual (Page 135)

TECHNICAL DATA
8
135
OPTIFLEX 1300 C
www.krohne.com 03/2014 - 4000172306 - HB OPTIFLEX 1300 R07 en
Other standards and approvals Other standards and approvals Other standards and approvals Other standards and approvals
EMC Electromagnetic Compatibility Directive 2004/108/EC in conjunction with
EN 61326-1 (2013). The device agrees with this standard if:
– the device has a coaxial probe or
– the device has a single / double probe that is installed in a metallic tank. For
more data, refer to Electromagnetic compatibility on page 8.
NAMUR NAMUR NE 21 Electromagnetic Compatibility (EMC) of Industrial Process and
Laboratory Control Equipment
NAMUR NE 43 Standardization of the Signal Level for the Failure Information of
Digital Transmitters
WHG
Z-65.16-460
In conformity with the German Federal Water Act, §9
CRN This certification is for all Canadian provinces and territories. For more data, refer
to the website.
Construction code On request: NACE MR0175 / ISO 15156; NACE MR0103
1 Metaglas® is a registered trademark of Herberts Industrieglas, GMBH & Co., KG
2 Refer to the Pressure/Temperature table for probe selection
3 This option is not available for FM- or CSA-approved devices
4 Hastelloy® is a registered trademark of Haynes International, Inc.
5 Kalrez® is a registered trademark of DuPont Performance Elastomers L.L.C.
6 HART® is a registered trademark of the HART Communication Foundation