Lenze E84AYCEC - Manual (Page 47)

EDS84AYCEC EN 3.0 - 09/2012
L
47
E84AYCEC communication manual (Ethernet POWERLINK)
Process data transfer
Preconfigured port interconnection of the process data objects (PDO)
7.2 Preconfigured port interconnection of the process data objects (PDO)
The preconfigured port interconnection of the process data objects can be activated by
setting the standard device code C00007 = "40: MCI".
The function block editor (FB Editor) can be used to display the port blocks LP_MciIn and
LP_MciOut with the preconfigured interconnections:

Note!
The »Engineer« screenshots shown on the following pages are only examples of
the setting sequence and the resulting displays.
The data in the display fields may differ from the ones of your project.