Lenze E84AYCEC - Manual (Page 66)

E84AYCEC communication manual (Ethernet POWERLINK)
Parameter reference
Parameters of the communication module
66
L
EDS84AYCEC EN 3.0 - 09/2012
11 Parameter reference
This chapter supplements the parameter list and the table of attributes for the Inverter
Drive 8400 contained in the software manual and in the »Engineer« online help by the
parameters of the communication module E84AYCEC (Ethernet POWERLINK).
11.1 Parameters of the communication module
This chapter lists the parameters of the E84AYCEC communication module (Ethernet
POWERLINK) in numerically ascending order.
C13000
C13001

Software manual/»Engineer« online help for Inverter Drive 8400
Here you will find general information on parameters.
Parameter | Name:
C13000 | 0x1E40.2 IP Address
Data type: UNSIGNED_32
Index: 11575
d
= 2D37
h
The code displays the IP address of the communication module.
• The IP address is derived from the EPL node address (Node ID): 192.168.100.[Node ID]
• The node ID is derived from the coding switch position or from C13899 .
 Node address setting ( 38)
Display range (min. value | unit | max. value)
0.0.0.0
(0x00000000)
255.255.255.255
(0xFFFFFFFF)
Subcodes Info
C13000/1 IP address
• Lenze setting: 0xC0A86401 = 192.168.100.1
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C13001 | 0x1E40.3 Subnet Mask
Data type: UNSIGNED_32
Index: 11574
d
= 2D36
h
The code declares the IP subnet mask which restricts the directly addressable IP address range (i.e. without a
gateway in the EPL segment of the routers). The value 255.255.255.0 (0xFFFFFF00) is always assigned to the subnet
mask in one segment.
Display range
(min. value | unit | max. value)
255.0.0.0
(0xFF000000)
255.255.255.0
(0xFFFFFF00)
Subcodes Info
C13001/1 EPL IP Subnet Mask
• Lenze setting: 0xFFFFFF00 = 255.255.255.0
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT