La Cornue Château 75 - Manual (Page 52)

Page 50 LA CORNUE Installation Guide Centenaire
08NOTINSTAL100/USA-6
US
A & C
AN
AD
A
Stick on label
Stick the appropriate label on to the data badge to indicate the gas the appliance is now set for.
Pressure Testing
Connect the appliance to the gas supply. Check the appliance is gas sound.
The gas pressure can be measured at the pressure test point on the appliance side on the manifold, near
the pressure regulator.
The light is located on the side at the top of the oven; it is
automatically switched on when the oven door is opened.
Please note: disconnect your stove before interfering with
the light to prevent any risk of an electrical shock and to
al low the appliance to cool down (if necessary).
Remove the protection glass and then unscrew the damaged
light.
Refit a new light and the protection glass.
Technical characteristics of the light:
- 25W - 230V - 240V
- 300°C
- E14 base
Oven Light M AINTENANCE
Pressure
regulator
Pressure regulator
Pressure
test point
A
B
C
B
Cap
Natural Gas
Cap
LP Gas
5. R
EPLACING THE OVEN LIGHT