KEYENCE KV Series - Manual (Page 115)

Chapter 3 Simulator
2-91
1 3
■ Status indication during execution
While a scan or step is executed, the current operation status and the scan time are
displayed in the status indication area on the main window.
Note: While the continuous scan operation is executed, "Execute Scan" is dis-
played. While the continuous step operation is executed, "Execute Step" is dis-
played.
■ Changing the display size and the display method
Five different sizes are available to display the ladder diagram. The ladder monitor
window can be always displayed below other windows.
• When changing the display size
The following five display sizes can be selected.
200% : Displays a ladder diagram at twice the standard size. This size is useful
when characters are small and difficult to read.
150% : Displays a ladder diagram at 1.5 times the standard size.
120% : Displays a ladder diagram at 1.2 times the standard size.
100% (Normal): Displays a ladder diagram in the standard size.
80% : Displays a ladder diagram in the smallest size. This size is useful when
checking the entire operation because the maximum number of cells can be
displayed on the screen.
To set the display mode, perform the following procedure.
Selecting the upper mode: View ➔ Zoom In (Ctrl + PageDown)
Selecting the lower mode: View ➔ Zoom Out (Ctrl + PageUp)
• When displaying the ladder monitor window at the bottom
The ladder monitor window can always be displayed below the mnemonic list
window and other windows. Therefore, each device can be registered to each
monitor by dragging and dropping it even if the registration monitor window and the
monitor all window are placed on top of the ladder monitor window.
To display the ladder monitor window at the bottom of the screen, perform the
following procedure.
To return the display status to the previous setting, repeat the same procedure.
View
➔ Move Ladder to Bottom
Step No. being executed Status (Operating, Stopped or Paused)
Operation mode being executed Scan time
KVSKA Chap 03.P65 08.3.11, 11:29 AM 91