KEYENCE KV Series - Manual (Page 200)

Appendices
2-176
Appendices
DM0700 to DM0799 Receives text [valid in KV-10R(W)/T(W)/16R(W)/T(W)/24R(W)/T(W)/
40R(W)/T(W)/80R(W)/T(W) only].
DM9200 to DM9299 Receives text (valid in KV-300 only).
DM9300 to DM9399 Receives text (valid in KV-300 only).
TM00 Stores higher-order 16 bits of product (MUL instruction), dividend and
quotient (DIV instruction).
TM01 Stores remainder (DIV instruction).
TM29 Not used.
TM30 Stores CTH1 current value transferred as soon as INT3 is executed
(read only).
TM31 Stores current scan time in unit of 0.1 ms (read only).
bit0 Manipulates all error flags when power is ON. 1: Retains
0: Clears them and starts
operation.
bit1 Performs process when RAM is cleared. 1: Memory error
0: Clears error and
continues operation.
bit2 Retains utility relays 1000 to 1915. 1: Yes 0: No
bit3 Retains utility relays 3000 to 3915. 1: Yes 0: No
bit4 Retains utility relays 4000 to 4915. 1: Yes 0: No
bit5 Retains utility relays 5000 to 5915. 1: Yes 0: No
bit6 Retains utility relays 6000 to 6915. 1: Yes 0: No
bit7 Unused (KV-300: Used as relays 2009 to 2011 by 1: Without MPS
MPS instruction). 0: With MPS
bit8 Unused
bit9 Unused (KV-300: Processes DM0000 to DM4999 1: Clears 0: Retains
when operation is started.)
bit10 Unused (KV-300: Processes DM5000 to DM8999 1: Clears 0: Retains
when operation is started.)
bit11 Processes DM when operation is started. 1: Clears 0: Retains
(KV-300: Processes DM9000 to DM9999 when
operation is started.)
bit12 Resets counter when operation is started. 1: Yes 0: No
bit13 Resets high-speed counter when operation is started. 1: Yes 0: No
bit14 Write-protects program in KV PLC. 1: Yes 0: No
bit15 Read-protects program in KV PLC. 1: Yes 0: No
DM9000 to DN9029 Stores A/D or D/A unit data (for up to 5 units).
E-2 Memory switches
E-3 Special memory list
■ Temporary memory
■ Data memory for communication
■ Memory for A/D units and D/A units (valid in the KV-300 only)
KVSKA Appendix.P65 08.3.11, 11:26 AM 176