KEYENCE KV Series - Manual (Page 161)

Chapter 4 Monitor
2-137
1 4
Setting the machine number
Set ➔ Set Machine Number
The Ladder Builder for KV can specify the station number of two or more KV-L2
units connected in the multi-drop method so that one personal computer can transfer
programs to and monitor programs in two or more KV-300 units.
To set the machine number, perform the following procedure while the monitor is
stopped (while communication is not being performed).
1. Select “Set Machine Number” from the “Settings” menu.
• The “Set Machine Number” dialog box is displayed.
2. Set the machine number of the communication destination KV-L2.
• The machine number refers to the number set by the station number setting
switch on the KV-L2 unit.
➮ Refer to the “Chapter 7 KV-L2 Serial Interface Module” on page 1-239.
3. Click the [OK] button to register the setting. To cancel the setting, click the
[Cancel] button.
Port 1: RS-232C
LADDER
BUILDER for KV
Station No.
F (when port 1 is used)
0 (when port 2 is used)
Port 2: RS-422A
RS-232C/RS-422A
converter
KV-300 Series Only
KVSKA Chap 04.P65 08.3.11, 11:30 AM 137