KEYENCE KV Series - Manual (Page 54)

Chapter 2 Editor
2-30
2
2.3.2 Setting the automatic file read function
File ➔ Auto Read
Specify the file to be automatically read when the software is started up. This func-
tion is convenient when the same file is always required to be read at startup.
Up to 16 files can be specified for the automatic read function.
The setup and cancellation procedures are described below.
■ Setting the automatic file read function
1. Set the ladder program window to be automatically read as the current window.
2. Select "Auto Read" from the "File" menu.
3. The message "Set this file for auto read?" is displayed. To set it for the automatic
file read function, click the [Yes] button.
The specified file is set for the automatic file read function. The next time you
start up the Ladder Builder for KV, this file is automatically read.
4. To specify another file, repeat steps 1 to 3 above.
■ Canceling the automatic file read function
1. Set the file set for the automatic read function as the current window. Select
"Auto Read" from the "File" menu.
2. The message "Cancel auto read?" is displayed. To cancel the setting of the
automatic read function, click the [Yes] button.
Note 1: A file not yet saved cannot be selected for the automatic file read function.
Save the file before selecting it.
Note 2: When the number of files specified for the automatic file read function
exceeds 16, the alarm message is displayed.
KVSKA Chap 02.P65 08.3.11, 11:28 AM 30