KEYENCE KV Series - Manual (Page 135)

Chapter 3 Simulator
2-111
1 3
Saving the monitor all window
File ➔ Save Window As
To save the monitor all window, perform the following procedure.
1. Select the monitor all window to be saved as the current window.
2. Select "Save Window As" from the "File" menu, or click the button.
• The "Save Window As" dialog box is displayed.
3. Specify the folder (directory) and the file name in which the file is to be saved.
Note 1: The monitor all window cannot be saved while a scan is being continuously
executed.
Note 2: Current values/preset values are not saved.
Reading the monitor all file
File ➔ Open Window
To read a monitor all file, perform the following procedure.
1. Select "Open Window" from the "File" menu.
•
The "Open Window" dialog box is displayed.
2. Click the button of "File Type", and select "Monitor All (*.kal)".
3. Specify the folder and file name in which the file to be read is located.
Folder (directory) Select the folder (directory) in which the file is to be saved.
The current folder (directory) is selected as the default.
File Name Enter the file name using up to 8 letters or numbers.
The extension is set to "kal", and should not be changed.
KVSKA Chap 03.P65 08.3.11, 11:29 AM 111