Interlogix Topaz User Manual - Manual (Page 321)

Chapter 11
Color Graphics Maps
303
Color Coded Security Areas
The security area may be color-coded. This changes the black outline of the icon and area name to a
selected color. The area of the map that covers the security area may be outlined as well. The color
of the outline on the map is the same color as the outline of the icon, as in the example below.
Figure 206.Color coded security areas
Notice that the alarm icons change from green to blue when the area is masked.
Masking Security Areas
To Mask or Unmask a security area, right-click the security area icon to display a menu next to the
icon. From the menu you can select any of the options that are not grayed out. In the following
example the only options are Mask and Toggle Mask. Any alarms assigned to the area that are
configured as non-maskable is not masked.
Click the option you want to select it.
You can also place the mouse pointer on the icon, highlighting it. This makes the Mask, Unmask, and
Toggle Mask icons appear in the top left portion of the toolbar. While the security area icon is
highlighted, click the desired button on the toolbar.
Camera Icon
Camera Icon (optional)
The following example shows the camera window with the location of the pan & tilt, zoom, focus, iris,
preset features, and how they operate. Most cameras do not have all of these features. Only the
features that are available and configured for the camera appears in the window.