Interlogix Topaz User Manual - Manual (Page 83)

Chapter 4
Cards
65
Masking Page
The Masking page allows you to select the Security Areas that the cardholder is authorized to Mask/
Unmask. “Masking” means turning off the alarm for that Security Area and “Unmasking” means
turning the alarm back on.
While viewing any Cards page, click the Masking tab button at the top of the window. The following
page displays:
Figure 51..Cards: Masking
Only Security Areas where masking is allowed are listed.
Configuring a Security Area for Masking
To mask any alarms, the cardholder must first be allowed into the Security Area. If you want to
configure an area for masking that does not appear in the list of Available Masking Areas (on the
Cards – Masking screen), click the link arrow to the left of the Available Masking Areas field. This
brings up an additional window showing the Security Area page, as shown below: