Interlogix Topaz User Manual - Manual (Page 62)

Topaz
User Manual
44
System Control Buttons
These four buttons are located above the alarm queue below the main screen area.
Main Browser Window
REFRESH ALARM
QUEUE When this button is clicked, the alarm queue is “refreshed” or “repainted”,
to re-display the image. If active alarms disappear from the queue, click
this button to retrieve them.
LOG OFF When this button is clicked, you are logged off the system. Before you can
take any further action on the Topaz system, you must first log back in with
a valid Operator ID and Password.
REFRESH MAIN FRAME When this button is clicked, the current main screen is “refreshed” or
“repainted”, to re-display the image.
TOPAZ SHUTDOWN When this button is clicked, the following message displays:
If you wish to continue shutting down the Topaz application, click OK.
Topaz shuts down and exits to the Windows desktop.
Note: If you are working at a Topaz workstation, the TOPAZ SHUTDOWN button only
stops the local software application. It does not shutdown the server. If you want
to stop the server, click this button on the Server machine.
The third section of the Main browser page is the larger portion of the
screen as shown in part on the left.
The main portion of the Main browser page has a set of silver
navigation buttons that duplicate the Main System navigation buttons at
the left side of the screen. As you move the mouse pointer over the
buttons, they change color slightly. If the left button is clicked while the
button is changed, it navigates to that section of the Topaz System.
You may use either set of buttons to navigate to the selected section of
the Topaz system.