Smithco Envizio Pro Installation & Operation Manual - Manual (Page 223)

Manual No. 016-0171-148 213
Reference of Icons
On-Screen Nudge Enabled
The following icons will be displayed on the Guidance screen if the on-screen nudge controls option is set to
Enabled.
Touch the Nudge Right icon to move the displayed guidance path to the right. The distance which
the path will be nudged is determined by the user defined value for the Active Nudge.
Touch the Nudge left icon to move the displayed guidance path to the left. The distance which the
path will be nudged is determined by the user defined value for the active nudge.
A-B Tools Menu Nudge
The following nudge icons appear in the Menu on the Guidance screen. Touch the Menu icon and select the
A-B Tools icon to access the following nudge tools.
Touch the Nudge Right icon in the A-B Tools menu to move the guidance path to the right in 1 inch
[2 cm] increments.
Touch the Nudge Left icon in the A-B Tools menu to move the guidance path to the left in 1 inch [2
cm] increments.
Field Boundary Tools
The following icons will be used while creating a field boundary.
Touch the Boundary Tools icon to display boundary tools available for the current job.
A previously recorded boundary can be loaded into the current job file by selecting the Load Field
Boundary icon in the Menu. A list of job files stored on the field computer is displayed. Select the
job name to load the boundary recorded that field boundary into the current job.
Touch the Delete Boundary icon to reset the current field boundary. A field boundary must be
present in the current job or this icon will not appear in the Menu.
Touch the Record Field Boundary icon to begin recording a new field boundary. While a field
boundary is being recorded, the Pause and End Field Boundary icons are displayed on the
Guidance screen.