Configuring detection rules – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 488
472
Figure 503 AP monitor configuration
2.
On the AP Monitor tab, select the AP to be configured and click the
icon to enter the page
.
Figure 504 AP operating mode configuration
3.
Configure the AP operating mode as described in
4.
Click Apply.
Table 152 Configuration items
Item Description
Work mode
Configure the AP operating mode:
•
In normal mode, an AP provides WLAN data services but does not perform scanning.
•
In monitor mode, an AP scans all 802.11g frames in the WLAN, but cannot provide
WLAN services.
•
In hybrid mode, an AP can both scan devices in the WLAN and provide WLAN data
services.
IMPORTANT:
•
When an AP has its operating mode changed from normal to monitor, it does not
restart.
•
When an AP has its operating mode changed from monitor to normal, it restarts.
NOTE:
•
An AP operating in hybrid mode can provide WLAN data services as well as scanning devices in the
WLAN, so WLAN service configurations are needed.
•
An AP operating in monitor mode cannot provide WLAN data services, so WLAN service
configurations are not needed.
Configuring detection rules
Configuring detection rules is to configure rogue device classification rules. An AC classifies devices as
rogues and friends based on the configured classification rules.