Configuring wids, Displaying history record – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 495
479
Figure 512 History record page
Configuring WIDS
Configuring WIDS
1.
Select Security > WIDS from the navigation tree.
Figure 513 WIDS configuration
2.
On the WIDS Setup tab, configure WIDS as described in
3.
Click Apply.
Table 157 Configuration items
Item Description
Flood Attack Detect
If you select the option, flood attack detection is enabled.
It is disabled by default.
Spoofing Attack Detect
If you select the option, spoofing attack detection is enabled. It is disabled by
default.
Weak IV Attack Detect
If you select the option, Weak IV attack detection is enabled. It is disabled by
default.
Displaying history record
1.
Select Security > WIDS from the navigation tree.
2.
Click the History Record tab to enter the history information page.