H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 513)

497
Table 164 Configuration items
Item Description
ACL Number Set the number of the IPv4 ACL.
Match Order
Set the match order of the ACL. Available values are:
• Config—Packets are compared against ACL rules in the order that the rules are
configured.
• Auto—Packets are compared against ACL rules in the depth-first match order.
Description Set the description for the ACL.
Configuring a rule for a basic IPv4 ACL
1. Select QoS > ACL IPv4 from the navigation tree.
2. Click the Basic Setup tab to enter the rule configuration page for a basic IPv4 ACL, as shown
in
Figure 534 .
Figure 534 Configuring an basic IPv4 ACL
3. Configure a basic IPv4 ACL, as described in Table 165 .
4. Click Add.