Grass Valley K2 Storage System Instruction Manual v.3.2 Nov.18 2008 - Manual (Page 328)

328 K2 Storage System Instruction Manual July 15, 2008
Chapter 7 Installing the Level 30R Storage System
On this page… Do this…
Define server roles
If the K2 Storage System has
one or more optional NH
servers, then FTP traffic
should go to the NH server,
not the K2 Media Server you
are now configuring. In this
case, do not select the FTP
server role.
Enter the name for the K2 Media Server. This should be the current
network name of the machine.
Enter the name or IP address of the Ethernet switch, as currently
configured on the switch, to which the K2 Media Server is connected.
Select all roles, except if NH server is present do not select FTP server.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on K2
Media Server B is as
follows:
• SQL Server
• K2 Server
• File System Server
• File System Client
• SNMP Services
• QuickTime
If software with Yes in the Required column reports as Not Installed, you
must first install it on the K2 Media Server before continuing. After
installing the software, click
Check Software . When all required
software reports as Installed, click Next .