Grass Valley K2 Storage System Instruction Manual v.3.2 Nov.18 2008 - Manual (Page 411)

July 15, 2008 K2 Storage System Instruction Manual 411
Software components installed
Software components installed
Each of the K2 installation packages installs software components that provide the
functionality for various applications and system tools. Refer to
Chapter 10, Overview
of K2 Storage Tools and to the K2 Media Client System Guide for descriptions. The
components installed are as follows:
Pre-installed software
Software is pre-installed on a K2 Media Server when you receive it from the factory.
Check K2 Storage System Release Notes for the most up-to-date list with version
information.
Software Components installed Comments
K2 Client Core system software Provides the primary media functionality.
AppCenter user
interface Allows you to operate AppCenter on the local machine.
AppServer Provides AppCenter functionality. It is accessed by both the
remote AppCenter (on a Control Point PC) and the local
AppCenter user interface.
Storage Utility Configures the media storage on stand-alone storage K2 Media
Clients only. Do not run Storage Utility on shared storage K2
Media Clients.
K2 System
Configuration Supports configuration of an external storage K2 Media Client
for shared storage. Provides to the remotely connected K2
System Configuration application the ability to configure the
local machine. You cannot run the K2 System Configuration
user interface on the local K2 Media Client.
Multi-Path I/O Installation files copied to K2 Media Client but software not
installed.
K2 Server Core system software Provides the primary media functionality.
Storage Utility Provides functionality for the remotely connected Storage
Utility that runs on the Control Point PC. You should not run
Storage Utility locally on the K2 Media Server.
K2 System
Configuration Provides to the remotely connected K2 System Configuration
application the ability to configure the local machine. You
cannot run the K2 System Configuration user interface on the
local K2 Media Server.
Control
Point AppCenter user
interface Connects to K2 Media Clients for control and configuration of
channels.
K2 System
Configuration user
interface Connects to K2 Media Clients, K2 Media Servers, RAID
storage, and Gigabit switches for configuration of the K2
Storage System.
Storage Utility Connects to the K2 Media Server, and through the K2 Media
Server to the RAID storage, for configuration of the media file
system, media database, and RAID storage.