Ipsec (ipsec peer settings) – Epson AcuLaser CX37DNF User Manual
Page 164
Item
Description
Authentication
Algorithm for ESP
When ESP is selected for Security Protocol, specify the ESP authentication algorithm.
Choices: None, MD5, SHA-1
Default: None
Authentication
Algorithm for AH
When AH is selected for Security Protocol, specify the AH authentication algorithm.
Choices: MD5, SHA-1
Default: MD5
Apply button
Applies the configuration settings for this window.
Clear button
Resets all configuration settings to previous values.
Cancel button
Click to cancel the entered data and return to the Network - TCP/IP - IPsec page.
IPsec (IPsec Peer Settings)
Item
Description
No.
Displays the number (No.) to be registered.
Perfect Forward Secrecy
To increase the IKE strength, select Use.
Choices: Not Use, Use
Default: Not Use
Peer’s Address
Specify the IP address of the peer.
Range: 2 to 39 bytes
Note:
An IPv4 or IPv6 address can be specified.
Pre-Shared Key
Specify the Pre-Shared Key text shared with the peer.
Range: Up to 64 bytes
Encapsulation Mode
Specify the operation mode of IPsec.
Choices: Not Use, Tunnel Mode, Transport Mode
Default: Not Use
Apply button
Applies the configuration settings for this window.
Clear button
Resets all configuration settings to previous values.
Cancel button
Click to cancel the entered data and return to the Network - TCP/IP - IPsec page.
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 164