Language setting, Public user mode, Registered user mode – Epson AcuLaser CX37DNF User Manual

Page 84: Public user mode registered user mode

Advertising
background image

Note:
A total of 100 users, including the administrator, can be logged on to Web-Based EpsonNet Config at the
same time from client computers. In addition, public users, registered users, and the administrator can
be logged on at the same time. However, only 1 client can be logged on as the Administrator.

Language Setting

If necessary, the display language used for Web-Based EpsonNet Config can be changed.

Public User Mode

In Public User Mode, you can view configuration settings but not change them.

1. Select Public User.

2. Click the Log in button.

Registered User Mode

In Registered User Mode, you can view configuration settings but not change them.

User Authentication Mode

Note:
To enter User Authentication Mode, log on in Administrator mode, set User Authentication (in the
Network - Authentication - User Authentication page) to On, and then register a new user in the System -
Authentication - User Registration - New Registration page. For details, refer to “User Registration” on
page 108 and “User Authentication” on page 188.

1. Select Registered User.

2. Type in the user name and user password in the User Name and User Password text boxes.

3. Click the Log in button.

Epson AcuLaser CX37 Series Reference Guide

Using Web-Based EpsonNet Config 84

Advertising