Epson AcuLaser CX37DNF - Manual (Page 38)

❏ NetWare Print: Select Enable.
❏ Frame Type:
Select Auto. (Select the frame type according to the network environment.)
❏ Mode: Select PServer.
❏ Print Server Name:
Specify the print server name created in step 4.
❏ Print Server Password:
Specify only when setting from the NetWare server.
❏ Print Queue Scan Rate: Specify 1. (Change as necessary.)
❏ Bindery/NDS: Select Bindery/NDS.
❏ Preferred File Server:
Specify the name of the file server that connects to the Pserver.
7. Restart the printer.
8. Use the NetWare server console to load MONITOR.NLM.
9. Select the connection information and, in the active connection column, check that the created
Pserver is connected.
For NetWare 4.x Remote Printer Mode (NDS)
1. Log on to NetWare as an administrator from a client computer.
2. Start up NWadmin.
3. Select either the organization or organizational unit container that offers the print service, and
then click Print Services Quick Setup on the Tools menu.
4. Enter the appropriate names in the Printer Server Name, Printer Name, Print Queue Name, and
Print Queue Volume fields, select Other/ Unknown from the Printer type field, and then save the
specified settings.
Note:
For queue user privileges, printer notification option, assignment of multiple queues, and passwords,
refer to the NetWare documentation, and specify settings as necessary.
Epson AcuLaser CX37 Series Reference Guide
Operation on NetWare 38