RIGOL DSG3000 Series - Manual (Page 135)

Chapter 6 Specifications RIGOL
DSG3000 User’s Guide 6-7
Phase Modulation
Operating modes Internal, external, internal + external
Maximum deviation
f ≤ 23.4375MHz 3rad(nom.)
f > 23.4375MHz N×5rad (nom.)
Resolution <0.1% of deviation, or 0.01rad, whichever is greater, (nom.)
Deviation accuracy f
mod
=1kHz, internal modulation
source
<1% of setting+0.1rad
ØM total harmonic
distortion
f
mod
=1kHz, deviation=5rad <1% (typ.)
Modulation frequency
response [1]
10Hz to 100kHz <3dB (nom.)
Pulse Modulation
Modulation source External, internal
On/off ratio
25MHz ≤ f < 3GHz >80dB
3GHz ≤ f ≤ 6GHz >70dB
Rise/fall time
(10%/90%)
<50ns [1] , 10ns (typ.)
Pulse repetition
frequency
DC to 1MHz
Pulse Generator
Operating modes Single pulse, double pulse, pulse train(option PUG-DSG3000)
Pulse period
Setting range 40ns to 170s
Resolution 10ns
Pulse width Setting range 10ns to (170s-10ns)
Resolution 10ns
Trigger delay
Setting range 10ns to 170s
Resolution 10ns
Double-pulse spacing Setting range
20ns to (170s-20ns)
Resolution 10ns
Triggering
Auto, external trigger, external gate, trigger key, bus (GPIB,
USB, LAN)
Pulse Train Generator (Option PUG-DSG3000)
Pulse train generator
Number of pulse patterns 1 ~ 2047
On/off time range 20ns to 170s
Repetition per pattern 1 to 256
NOTE: [1] External operating mode, measured at 5rad deviation.
[2]The state of ALC is off.