RIGOL DSG3000 Series - Manual (Page 26)

RIGOL Chapter 1 Quick Start
1-10 DSG3000 User’s Guide
9. Power Key
Turn on or off the signal generator. When this key is
turned off, the signal generator is in standby state,
indicated by a pulsing LED. To fully remove power from
the instrument, flip the rear panel power switch off and
remove the power cord. In addition, this key has a
delayed switching function. The instrument can be
turned on or off only when pressing this key and holding
it down for a certain time. With this feature, you can
avoid turning off the instrument because of accidentally
touching the key.
Press System  Power Status to select “Open” or
“Default”. When ”Default” is selected, after the
instrument is powered on and the power switch at the
rear panel is turned on, you need to press this key to
start the instrument. When ”Open” is selected, the
instrument will start automatically after it is powered on
and the power switch at the rear panel is turned on.
10. Built-in Help System
To get the help information of any front panel key or
menu softkey, press this key and then press the desired
key.
11. View Switch Key
It is used to switch the interface display mode to normal
mode or parameter zoom-in mode. For details, please
refer to “User Interface”.
12. Trigger Control Key
When the trigger type of SWEEP is “Key”, press this key
once to trigger a sweep.
When the trigger mode of Pulse is “Key”, press this key
once to enable a pulse modulation.