RIGOL DSG3000 Series - Manual (Page 93)

Chapter 2 Front Panel Operations RIGOL
DSG3000 User’s Guide 2-53
NOTE: If you want to select “Record csv” or “AmpCal” file type, please pre-install the
power meter option (PMC-DSG3000), otherwise the menus are grayed out and
disabled.
File Type Format Suffix Explanation
Train List BIN .TRN The current train list can be saved by the format
of BIN, and you can recall it when required.
Train csv CSV .CSV The current train list can be saved by the format
of CSV. You can copy (when saving to D disk) or
save it to USB storage device. After that the file
can be opened and viewed by a spreadsheet
program on the computer.
Flatness BIN .FLA The current flatness list can be saved by the
format of BIN and you can recall it when required.
Flat csv CSV .CSV The current flatness list can be saved by the
format of CSV. You can copy (when saving to D
disk) or save it to USB storage device. After that
the file can be opened and viewed by a
spreadsheet program on the computer.
Swp List BIN .SWP The current sweep list can be saved by the format
of BIN and you can recall it when required.
Swp csv CSV .CSV The current sweep list can be saved by the format
of CSV. You can copy (when saving to D disk) or
save it to USB storage device. After that the file
can be opened and viewed by a spreadsheet
program on the computer.
State BIN .STA The current system state can be saved by the
format of BIN.
Record csv CSV .CSV The current data recorded by the power meter
can be saved by the format of CSV. You can copy
(when saving to D disk) or save it to USB storage
device. After that the file can be opened and
viewed by a spreadsheet program on the
computer.
AmpCal BIN .ALC The amplitude difference of sweep list measured
by power meter can be saved by the format of
BIN.
Arb BIN .ARB The arbitrary waveform file saved by the format of
BIN. You can load the file when required.
Tips: You can generate the file of csv format using a spreadsheet program on the
computer. Then you can open the file to edit directly the required parameters in the
excel table, and save it to USB storage device. In addition, you can also load the file
to RF signal generator when required.