RIGOL DSG3000 Series - Manual (Page 98)

RIGOL Chapter 2 Front Panel Operations
2-58 DSG3000 User’s Guide
Delete
After selecting a file stored, press Delete to delete the file selected.
Copy
After selecting a file stored, press Copy to select “Copy” or “Paste”.
1. Copy
Copy the file or folder selected under the current directory.
2. Paste
Paste the file or folder.
 When the copy path is the same as the paste path and the current path has
contained a file or folder with the same name, the corresponding copy file
with the “dup” prefix name is generated after performing paste operation.
 When the copy path is different from the paste path and the current path
has contained a file or folder with the same name,
—
Replace File: press this key to replace the original file or folder.
—
Cancel: press this key to cancel the paste operation.
To Create a Directory
Create a new folder. The length of the folder name cannot exceed 28 English
characters or numbers (or 14 Chinese characters).
In the store and recall interface, use the up/down direction keys or knob to select the
current saving directory (when USB storage device detected is available, you can
switch between D disk and E disk); press Enter or the left/right direction keys to
unfold the current directory; press Create Dir to enter the filename input interface,
edit the folder name according to the introduction in “Input the filename” and
press OK to create an empty folder under the current directory.