RIGOL DSG3000 Series - Manual (Page 137)

Chapter 6 Specifications RIGOL
DSG3000 User’s Guide 6-9
I/Q Baseband Generator (Option IQ-DSG3000)
Output impedance 50Ω (nom.)
Output voltage
Setting range 0.1V
pp
to 1.5V
pp
Resolution 1mV
Frequency response Referenced to 1MHz ≤ 10MHz
<0.5dB (nom.)
≤ 30MHz <1dB (nom.)
I/Q imbalance
Magnitude
≤ 10MHz <0.1dB (nom.)
≤ 30MHz <0.2dB (nom.)
Nonlinear phase
≤ 10MHz 200ps (nom.)
≤ 30MHz 500ps (nom.)
SFDR Sine ≤ 30MHz >50dB (nom.)
Waveform memory
Waveform length
1 sample to 8 Msample
in one-sample steps
Resolution 14 bits
Loading time 1Msample <10 s [1] (nom.)
Nonvolatile memory 1G Bytes
Sample rate Setting range 1 kHz to 50 MHz, 100
MHz
Resolution 0.01 Hz
Trigger
Triggering
Auto, trigger key,
external, bus (GPIB,
USB, LAN)
Operating modes
Retrig, armed auto,
armed retrig, single
External trigger delay
Setting range 0 to (2 16 – 1)
Resolution 1
External trigger inhibit
Setting range 0 to (2 16 – 1)
Resolution 1
External trigger pulse width >20 ns (nom.)
NOTE: [1] Load from flash internal non-volatile memory.