ARRI ALEXA 35 Body & PL Mount Set (LBUS) - Manual (Page 76)

User Buttons 76
VF , SDI 1, SDI 2 Zoom
VF , SDI 1, SDI 2 Zoom Position
VF , SDI 1, SDI 2 Zoom
(smart)
Switching Zoom on and off on the chosen output.
Switching the zoom position.
Press to activate Zoom. Further button presses switch the Zoom position. A
button long press deactivates Zoom.
SDI Color Bars
EI Increase
EI Decrease
FPS Increase
FPS Decrease
FPS Preset
ND Increase
ND Decrease
Shutter Increase
Shutter Decrease
WB Increase
WB Decrease
Audio Ch1 Increase
Audio Ch1 Decrease
Audio Ch2 Increase
Audio Ch2 Decrease Turns SDI color bars on or off.
Increases the exposure index to the next value in the list.
Decreases the exposure index to the next lower value in the list.
Sets the sensor frame rate to the next higher value in the list.
Sets the sensor frame rate to the next lower value in the list.
Sets the sensor frame rate to a user defined value.
Sets the ND filter to the next higher value in the list.
Sets the ND filter to the next lower value in the list.
Sets the shutter to the next higher value in the list.
Sets the shutter to the next lower value in the list.
Sets the white balance to the next higher value in the list.
Sets the white balance to the next lower value in the list.
Increases gain of audio channel 1 in 1dB steps.
Decreases gain of audio channel 1 in 1dB steps.
Increases gain of audio channel 2 in 1dB steps.
Decreases gain of audio channel 2 in 1dB steps.
(requires channel control set either to Manual or Manual (+L) )
Audio Mute int. Mic
Audio Solo Mutes / unmutes the internal microphones.
Mutes all audio recording channels except one. Toggles through Off, Ch1, Ch2,
Ch3, Ch4, selecting the next channel with every button press. Channels that
are not assigned to an audio input are skipped. When Audio Solo is active, the
selected channel is marked in the audio bars displayed in the status info and
the homescreen. Audio Solo only affects the headphones output (not the em-
bedded audio in the SDI stream).
Auto WB First press displays the auto white balance overlay, press the button again
within one second to execute auto white balance.
Check Last Clip
EF Close Iris
EF Open Iris Plays the last five seconds of the last recorded clip, then playback is exited.
Closes the iris of an EF lens (only available when EF Mount is attached).
Opens the iris of an EF lens (only available when EF Mount is attached).
Short press closes/opens by 1/x stop (step size depending on lens), long press
closes/opens by 1 stop.
Flip Monitor Switching the flip-out monitor between normal and flipped mode. To return to
automatic flip mode, press and hold button for two seconds.