Freescale Semiconductor Microcontrollers - Manual (Page 408)

HC08 FSICEBASE Emulator
Establishing Communication
408 Microcontrollers Debugger Manual
Figure 17.1 Communication Dialog Box
7. Select TCP/IP
8. In the text box, type the IP Address that your network administrator assigned to the
FSICEBASE
NOTE For more information on the IP address of the FSICEBASE, see “Assigning an
IP Address to FSICEBASE” .
9. Click OK
The debugger connects to the FSICEBASE through the ethernet port.
Communication Through USB Port
If you use a USB connection to establish communication between your host computer and
the FSICEBASE:
1. Set up hardware as explained in Setting Up the Hardware .
2. Start the debugger as explained in Starting the Debugger .
NOTE If you have started the debugger from your project previously, when you select
Debug in the IDE, the Debugger attempts to connect to the FSICE with the last
known settings. If the Debugger connects, you do not need to perform the
following steps.
3. Make sure connection is FSICEBASE
a. From debugger main menu, select Component
b. Select Set Connection — Set Connection dialog box appears
c. Select FSICE emulator from Connection drop-down box
d. Click OK