Freescale Semiconductor Microcontrollers - Manual (Page 837)

Debugger Engine Commands
Debugger Commands
837 Microcontrollers Debugger Manual
Usage
WL range list
range: is an address range constant that defines the block of memory to be set to
the longword values in the list.
list: is a list of longword values to be stored in the block of memory.
Components
Debugger engine.
Example:
in>WL 0x2000 0x0FFFFF0F
This command fills up memory starting at address 0x2000 with the 0x0FFFFF0F
longword value, and modifies the addresses 0x2000 to 0x2003.
in>WL 0x2000, 2 0x0FFFFF0F
This command fills up the memory area 0x2000 to 0x2007 with the longword
value 0x0FFFFF0F.
WW
The WW command sets a specified block of memory to a specified list of word values.
When the range is wider than the list of word values, the list of word values is repeated as
many time as necessary to fill the memory block. When the range is not an integer or a
multiple of length of the list, the last copy of the list is truncated accordingly.
Usage
WW range list
range: is an address range constant that defines the block of memory to be set to
the word values in the list.
list: is a list of word values to be stored in the block of memory.
Components
Debugger engine.
Example:
in>WW 0x2000..0x200F 0xAF00
This command fills up the memory range 0x2000...0x200F with the 0xAF00 word
value.