Freescale Semiconductor Microcontrollers - Manual (Page 793)

Debugger Engine Commands
Debugger Commands
793 Microcontrollers Debugger Manual
Usage
IF condition
Where condition is same as defined in “C” language.
Components
Debugger engine.
Example:
DEFINE jump = 0
...
DEFINE jump = jump + 1
...
IF jump == 10
T
DEFINE jump = 0
ELSEIF jump == 100
DEFINE jump = 1
ELSE
DEFINE jump = 2
ENDIF
The jump = = 10 condition is evaluated and depending on the test result, the T
Trace instruction is executed, or the ELSEIF jump = = 100 test is evaluated.
INSPECTOROUTPUT
The Inspector dumps the content of the specified item and all computed subitems to the
command window. Uncomputed subitems are not printed. To compute all information, the
ATTRIBUTES EXPAND command is used.
Usage
INSPECTOROUTPUT [name {subname}]
The name specifies any of the root items. The subname specifies a recursive path
to subitems.
If a name contains a space, it must be surrounded by double quotes (").