Global management – Polycom ViewStation User Manual
Page 100
Chapter 2
Optional Configurations
84
www.polycom.com
Figure 2-51. Dialing Rules 2 Screen
If the private network requires a dial prefix to access certain area
codes (or city codes), set these prefixes on this screen. This prefix
is dialed before the area code. For example, some sites require a 9
before dialing a 1-800-xxx-xxxx number.
Enable the Always Dial Area Code option if you must dial the area
code to sites that have the same local area code as the ViewStation.
This is sometimes necessary for 10-digit dialing.
Global Management
The Global Management screen (System Info > Admin Setup >
LAN/H.323 > Global Management) is used to remotely monitor,
configure, and maintain the ViewStation from a remote location. To
use the Global Management feature, your organization must use
Polycom Global Management System
software.
The Global Management screen shown in Figure 2-52 contains
icons used to configure the following global management for the
ViewStation:
•
GMS Setup: Configures GMS properties.
•
Info 1: Provides for contact and support for the GMS
system.