Polycom ViewStation - Manual (Page 40)

Chapter 1 Getting Started
ViewStation User Guide 24 www.polycom.com
Figure 1-18. Auto Detect SPIDs Screen
To manually enter the SPID numbers for the ViewStation as shown
in Figure 1-18, highlight each line and channel, and press the
SELECT button on the remote control. Enter the SPID numbers
accordingly.
15. If PBX is selected on the Auto Detect SPIDs screen, the
following screen (shown in Figure 1-19) requires the number
used to obtain an outside line.
Figure 1-19. Outside Line Calls Screen