Polycom ViewStation - Manual (Page 119)

Chapter 3 Using the ViewStation
© Polycom, Inc., 2001 103 ViewStation User Guide
To place a speed dial call:
1. From the Main Menu, use the ARROW buttons on the remote
control to select the Address Book icon. The Speed Dial
screen (Figure 3-6) is displayed when the SELECT button is
pressed.
Figure 3-6. Speed Dial Screen
2. The Speed Dial screen displays a maximum of six speed dial
entries. There are two ways to select an entry listed on the
Speed Dial screen:
• Use the remote control’s numeric keypad to select the
number of the speed dial entry you want to dial.
The speed dial entry’s number appears at the top left corner
of the entry.
• Use the ARROW buttons on the remote control to highlight
the desired speed dial entry corresponding to the number of
the speed dial entry, and press the SELECT button on the
remote control.
To keep a specific entry on the Speed Dial screen, do the
following:
1. Select a number 1-6.
2. Press the # button on the remote control. A Lock icon
appears on the right side of the box for that number.
3. Press the # button to toggle between locked and
unlocked.
Complete the following steps to add an entry from the address
book to the Speed Dial screen: