Polycom KIRK KWS6000 - Manual (Page 102)

KIRK Wireless Server 6000 Installation and Configuration Guide
10–14
Figure 10-11 Adm. Page WS: Configuration/General page
2
Click DHCP assigned.
3
In the MTU field (Maximum Translation Unit), type the size of the largest
packet, that your network protocol can transmit (optional).
4
In the Domain field, type the domain name of the system (optional).
5
In the Server field (under DNS - Domain Name System), type the IP
address of the DNS server (optional).
6
In the Server field (under NTP - Network Time Protocol), type the IP
address of the NTP server from which the system will obtain the current
time (optional).
7 From the Time Zone list, select the wanted time zone (optional).
8 Click Save to save your general configuration data.
Wireless Server Configuration
On the Configuration/Wireless Server page you configure the KWS6000 to
allow subscription. If the system does not allow subscription, it is not possible
to subscribe a handset.
Refer to
“Wireless Server Configuration” on page 10-9 for more information.