Polycom KIRK KWS6000 - Manual (Page 51)

6–1
6
Installing KIRK Base Station
This section provides information about the base station and how to install it.
Before you install the equipment, ensure that a site planner defines the location
of the base stations.
This section includes information about:
•
“KIRK Base Station Description” on page 6-1
• “Installing the KIRK Base Station” on page 6-5
• “Recording the Installation Information” on page 6-6
KIRK Base Station Description
This section contains information about:
•
“KIRK Base Station provides RF Channels to KIRK Handsets” on page 6-1
• “KIRK Base Station Types and Part Numbers” on page 6-2
• “KIRK Base Station Appearance and Components” on page 6-2
• “KIRK Base Station LED Indicators” on page 6-4
• “KIRK Base Station - Reset Button” on page 6-5
KIRK Base Station provides RF Channels to KIRK Handsets
The base station is a compact device that contains RF circuitry and
transmit/receive antennas. The main function of the base station is to provide
audio and data communication between the handsets and the KWS6000. The
base station supports 11 RF channels for DECT or USA DECT bands.
Note
The base station is also termed by some manufacturers as the RFP (Radio
Fixed Part).