Polycom KIRK KWS6000 User Manual
Page 61
Advertising
Installing KIRK Repeater
7–5
Figure 7-2
Connect Power to the Bottom of the Repeater and External Antenna
Cable to the Rear of the Repeater
1
Connect the power supply cable into the RJ11 connector in the bottom of
the repeater. For repeaters with external antenna, connect the external
antenna cable to the antenna connector in the rear of the repeater as well.
2
Mount the repeater onto the wall using the screws accompanying the
repeater.
Caution
The repeater must not be installed at any angle other than vertical. If the
repeater is placed upside-down, the coverage area of the repeater is
decreased by 40 - 50% and it might not transmit or receive effectively.
Advertising