Polycom KIRK KWS6000 User Manual
Page 170
KIRK Wireless Server 6000 Installation and Configuration Guide
15–22
3
Select the file in question, and then click Open.
The file to select has the extension .bin.
4
Click Update.
Wait until the system has finished updoading.
Figure 15-34
Adm. Page: Firmware Update Progress Bar
5
Optionally, you can block new calls during a firmware update by clicking
Administration (Administration Page of KWS6000), and then Wireless
Server.
Figure 15-35
Adm. Page WS: Administration/WS page
Under Service Status click Block.
6
When the update is finished, click Reboot to execute the changes.
7
If you have blocked new calls during a firmware update, enable new calls
again by clicking Administration (Administration Page of KWS6000),
then Wireless Server and then clicking Allow.