Polycom KIRK KWS6000 - Manual (Page 12)

KIRK Wireless Server 6000 Installation and Configuration Guide
1–2
Chapter Overview
Where is it? What is it about? When to use it?
Chapter 2 Introduction to KIRK
Wireless Server
6000
To learn about the different
components in a typical KWS6000
configuration.
Chapter 3 Deploying the KIRK
Wireless Server 6000 To learn how to deploy a KWS6000
Multi-cell installation.
Chapter 4 Installing KIRK Wireless
Server 6000 and KIRK
Media Resource To learn about KWS6000/KIRK
Media Resource and to install it.
Chapter 5 Installing KIRK Codec
Module To learn about the KIRK Codec
Module and to install it in a KIRK
Media Resource.
Chapter 6 Installing KIRK Base
Station To learn about the KIRK Base
Station and to mount it onto wall
indoors.
Chapter 7 Installing KIRK Repeater To learn about the KIRK Repeater
and to mount repeater onto wall or
ceiling indoors.
Chapter 8 Preparing KIRK Handset
for Use To prepare KIRK Handsets for use,
installing and charging battery.
Chapter 9 Basic Network
Configuration To learn about DHCP and TCP/IP
Setup and to assign options to
DHCP server.
Chapter 10 Configuring KIRK
Wireless Server 6000 To power up the KWS6000,
connect a computer to the
KWS6000, access the web based
Administration Page and configure
the KWS6000 using DHCP or
TCP/IP Setup.
Chapter 11 Configuring KIRK Media
Resource To power up the KIRK Media
Resource, connect a computer to
the KIRK Media Resource, access
the web based Administration Page
and configure the KIRK Media
Resource using DHCP or TCP/IP
Setup.