Polycom SOUNDPOINT 3804-11530-222 - Manual (Page 30)

Release Notes - SIP Application Changes
Page 24 Copyright © 2007 Polycom, Inc.
.cfg
File Action Parameter Description
sip added voIpProt.SIP.useSendonlyHold Can be set to 0 or 1. Null default is 0.
Default in sip.cfg is 1.
If set to 1, the phone will send a reinvite
with a stream mode attribute of “sendonly”
when a call is put on hold. This is the
same as the previous behavior.
If set to 0, the phone will send a reinvite
with a stream mode attribute of “inactive”
when a call is put on hold.
Note:
The phone will ignore the value of this
parameter if set to 1 when the parameter
voIpProt.SIP.useRFC2543hold
is also set to 1 (default is 0).
sip added dialplan.applyToUserSend="1"
dialplan.applyToUserDial="1"
dialplan.applyToCallListDial="0"
dialplan.applyToDirectoryDial="0" Refer to Technical Bulletin 11572.
sip changed dialplan.digitmap.timeOut="3" to
"3|3|3|3|3|3"
Refer to Technical Bulletin 11572.
sip changed tcpIpApp.sntp.daylightSavings.start.mo
nth="4" to “3”
sip changed tcpIpApp.sntp.daylightSavings.start.dat
e="1" to “8”
sip changed tcpIpApp.sntp.daylightSavings.stop.mon
th="10" to “11”
sip changed tcpIpApp.sntp.daylightSavings.stop.day
OfWeek.lastInMonth="1" to “0”
Changes to support new daylight savings
time rules.
sip added call.stickyAutoLineSeize.onHookDialing Refer to Administrator’s Guide Addendum
for SIP 2.1.
sip changed voice.gain.rx.digital.chassis.IP_650="-9"
to “6”
sip changed voice.gain.rx.digital.ringer.IP_650="-21"
to “-12”
sip changed voice.handset.sidetone.adjust.IP_430="
-12" to “-13”
Gain changes required to match new
software load.
sip added voIpProt.server.x.transport and
voIpProt.SIP.outboundProxy.transport
Added “TCPOnly” as a possible value for
these existing parameters.
2.8 Version 2.0.3 B
2.8.1 Added or Changed Features
• 14874:
Added support for SoundPoint IP 650 platform
• 15775: Added support for LCD backlight on SoundPoint IP 650
• 15852: Added support for 32 MB of memory on SoundPoint IP 650
• 15853: Added support for G.722 audio code on SoundPoint IP 650
• 16335: Added support for 8 MB of flash on SoundPoint IP 650