Polycom SOUNDPOINT 3804-11530-222 - Manual (Page 59)

Release Notes - SIP Application Changes
Copyright © 2007 Polycom, Inc. Page 53
• 12284: Time handling for DHCP needs to be improved
• 12289: Common audio equalization tables should be grouped together
• 12323: Exiting Display Diagnostics with termination key does not stop display
diagnostics
• 12333: "Direct" and "Group" soft keys can appear when directed and group
call pickup features are disabled
• 12370: Ringing can be heard during a connected call mixed with audio when
there is a high number of unanswered incoming calls
• 12541: Error messages can appear in log file after putting two calls on hold
2.23.4 Configuration File Parameter Changes
.cfg
File Action Parameter Description
sip added voIpProt.SIP.allowTransferOnProceeding 0 = don’t allow transfer during
consultation call proceeding state
1 = do allow it (1 is the default)
sip added voIpProt.SIP.outboundProxy.transport Same function and possible values as
existing voIpProt.server.x.transport
parameter. Default is DNSnaptr.
sip added voice.gain.rx.analog.chassis.IP_601,
voice.gain.rx.analog.ringer.IP_601,
voice.gain.rx.digital.chassis.IP_601,
voice.gain.rx.digital.ringer.IP_601,
voice.gain.tx.analog.chassis.IP_601,
voice.gain.tx.digital.chassis.IP_601,
voice.gain.tx.analog.preamp.chassis.IP_601
Gains specifically for the IP 601
platform.
sip changed voice.aec.xxx Changed parameter values. Do not
modify these.
sip changed voice.ns.xxx Changed parameter values. Do not
modify these.
sip added/
removed
voice.rxEq.xxx This whole section has changed and
must be used. Do not modify these.
sip added/
removed
voice.txEq.xxx This whole section has changed and
must be used. Do not modify these.
sip added log.level.change.sotet,
log.level.change.ttrs
Added log level control for logging
related to Expansion Module.