4 configuration file parameter changes – Polycom SOUNDPOINT 3804-11530-222 User Manual

Page 37

Advertising
background image

Release Notes - SIP Application

Changes

Copyright © 2007 Polycom, Inc.

Page 31

• 17573: In some scenarios, phone sends 603-Decline after 2 rings on SCA line
• 17639: Expansion Module updates should be continuously done in the

background

• 17656:

Phone does not handle outbound fragmented packets that are tagged

for VLAN

• 17706: Phone may freeze after regaining connection with LCS server
• 17783: PRACK message goes directly between phones instead of via LCS

server because of no record-route

• 17797: In some scenarios, phone sets its own presence status to 'Away' when

using the LCS server

• 17831: In some scenarios, phone adds itself to its own buddy list when using

the LCS server

• 17976: NTLM signature should include full "From:" URI

2.12.4 Configuration File Parameter Changes

.cfg
File

Action Parameter

Description

sip removed

call.callWaiting.prompt

sip removed

sec.srtp.offer,

sec.srtp.require,

sec.srtp.key.lifetime

sip

added

voIpProt.SIP.pingInterval

This parameter is used together with
reg.x.proxyRequire. It specifies the number
of seconds between PING messages sent
by the phone.
Default = 0 = disabled.
Possible range is 0 to 3600.
Note: Server support is required before this
feature can be used.

sip

added

res.finder.minFree

This parameter is used to ensure that the
phone will not download resources which
could leave it with insufficient memory to
function correctly. A resource will not be
downloaded if the phone has less memory
free than res.finder.minFree [kBytes].
This parameter can have the values 1 to
2048. The recommended configuration file
value is 1200. If the parameter is left empty
the default is 800.
Notes:
Setting this value too small may affect
functionality of the phone.
Setting this value too large may mean that
some resources are not downloaded at boot
time.

Advertising