Polycom SOUNDPOINT 3804-11530-222 - Manual (Page 33)

Release Notes - SIP Application Changes
Copyright © 2007 Polycom, Inc. Page 27
.cfg
File Action Parameter Description
sip added voice.handset.rxag.adjust.IP_650
voice.handset.txag.adjust.IP_650
voice.handset.sidetone.adjust.IP_650
voice.headset.rxag.adjust.IP_650
voice.headset.txag.adjust.IP_650
voice.headset.sidetone.adjust.IP_650
These parameters control gain settings
which are specific to the SoundPoint IP 650
phone. The values should not be modified.
sip added dir.local.volatile.8meg This parameter applies only to platforms
with 8 Mbytes of flash memory.
It can be set to 0 or 1 and is 0 by default.
If set to 1, use volatile storage for phone-
resident copy of the directory to allow for
larger size.
sip added dir.local.nonVolatile.maxSize.8meg This parameter applies only to platforms
with 8 Mbytes of flash memory.
It can be set from 1 to 100. The units are
Kbytes and the default is 100.
This is the maximum size of non-volatile
storage that the directory will be permitted
to consume.
sip added log.level.change.usb This parameter is used to set the logging
detail level for the “usb” module.
sip added prov.fileSystem.ffs0.8meg.minFreeSpac
e
The minimum free space in Kbytes to
reserve in the file system when
downloading files from the boot server.
It is recommended that this value should not
be modified.
The allowed range for this parameter is 5 to
512 and the default is 512.
sip added usb.enable This parameter enables or disables the
USB port on the phone. It can be set to 0 or
1. The Null default is 0.
sip added usb.bulkDrive.enable This parameter enables or disables support
for a USB bulk drive (“memory stick”)
connected to the USB port on the phone. It
can be set to 0 or 1. The Null default is 0.
sip added usb.bulkDrive.name This parameter is a string which specifies
the name of the mounted USB drive. The
Null default is “usbDrive”.
sip changed dir.local.volatile.maxSize
prov.fileSystem.rfs0.minFreeSpace
ramdisk.bytesPerBlock
res.finder.sizeLimit
res.finder.minFree
res.quotas.x.value
mb.limits.nodes
mb.limits.cache
For the SoundPoint IP 650 platform only,
the values specified by these parameters
are replaced internally with double the
value. This is because the SoundPoint IP
650 platform has 32 Mbytes of memory
instead of 16 Mbytes.
2.10 Version 2.0.2
2.10.1 Added or Changed Features
• 8428:
Split call signaling processing from "lamp management" processing