Polycom SOUNDPOINT 3804-11530-222 User Manual

Page 47

Advertising
background image

Release Notes - SIP Application

Changes

Copyright © 2007 Polycom, Inc.

Page 41

• 16075: Phone plays re-order tone when taking call off hold in specific scenario
• 16100: BLA line key status is not maintained in specific scenario
• 16116: Cannot register lines 7 to 12 from SIP configuration menu
• 16149: Line key LEDs for BLA lines can switch from one line key to another in

specific scenario

• 16250: Comfort noise received by phone is handled incorrectly
• 16374:

Phone keeps sending NOTIFY if 481 received in early NOTIFY

• 16388: Removed DC bias from Tx signal
• 16429: Web interface does not have configuration options for lines 7 to 12
• 16459: Phone is unable to park a call that is received via ACD final destination
• 16480: BLA Led gets stuck and there is a phantom NOTIFY from the phone in a

particular scenario.

• 16485:

Notify Talk is ignored if interval between it and 180 is too brief

• 16565: Dialed digits can be lost if they are dialed too quickly after selecting an

SCA line

• 16599: SoundPoint IP 300 and 301 phones reboot when using G.729 codec in a

conference call with SIP 1.6.6 C software

• 16660: Failover to backup SIP server does not occur when hostname of

primary cannot be resolved via DNS

• 16691: Dialog does not get removed after its expiration time in some

scenarios. This addresses #16374 and #16480.

• 16813: Going on and off hook repeatedly on a shared line may result in the line

showing an active call state when the handset is physically on-hook

• 16915:

Phone sends SIP requests to port 5060 regardless of

voIpProt.SIP.outboundProxy.port configuration setting

• 17014:

When a shared line call is on hold, using on-hook dialing seizes the last

used line instead of the first available line

• 17284: An unnecessary ACK is sent by the phone if no reply is received within

32 seconds

2.14.4 Configuration File Parameter Changes

.cfg
File

Action Parameter

Description

sip added voIpProt.SDP.answer.useLocalPreferences

Can be 0 or 1. Use this new parameter to
have the phone use its own preference
list when deciding which codec to use
rather than the preference list in the offer.
Null default = 0 = disabled.

Advertising