Polycom SOUNDPOINT 3804-11530-222 - Manual (Page 35)

Release Notes - SIP Application Changes
Copyright © 2007 Polycom, Inc. Page 29
2.12 Version 2.0.1
The 2.0.1 Release includes all the changes and corrections from Releases 1.6.6 and 1.6.7
2.12.1 Added or Changed Features
• 8072:
Added Nortel MCP NAT traversal parameters to config files
• 11678:
Added template support in master configuration file
• 16399: Changed behavior when there is an incoming call on a phone – idle dial
digits are no longer cleared when an incoming call is received
• 16645:
Added support for NAT keep-alive
• 17412: Added ability to set Ethernet link mode to SoundPoint IP 430
• 17413: Added ability to set Ethernet link mode to SoundStation IP 4000
2.12.2 Removed Features
• 14275: call.callWaiting.prompt has no effect
This parameter has been removed from the configuration files because it is no
longer used.
2.12.3 Corrections
The following issues have been resolved with this release:
• 7723: Name of net logging module is sometimes corrupted in log file
• 12337: Display of SoundPoint IP 430 flickers under fluorescent lights and may
be shifted vertically by a few pixels
• 12382: The phone will freeze if the DNS server address is all zeroes and the
phone uses a FQDN server name
• 12647:
Feature keys cannot be reconfigured to perform other functions
• 12749: Phone locks up during CERT PROTOS testing
• 15138: Text in line labels on SoundPoint IP 430 should be moved one pixel left
• 15227: Phone model of SoundPoint IP 430 is incorrect in CDP packets
• 15311: Contrast adjustment range on the SoundPoint IP 430 is unsuitable
• 15729: Phone does not retry connecting to boot server in specific scenario
• 15731: Phone should use Office Communicator model to update LCS presence
status when multiple endpoints share same registration
• 15812: Phone doesn't handle simultaneous 200/OK and CANCEL race
condition
• 16069: When using Russian dictionary, phone reboots after exiting the DHCP
Menu
• 16073:
Phone does not clear indicators if BLF removed on server